For Sale: Sekonic Studio Deluxe III model L-398A Light Meter ($150)

Sekonic Studio Deluxe III model L-398A Light Meter

L-398A Studio Deluxe III

The classic photo meter tracing its roots to the famous Norwood Director, the Sekonic L-398A has become a favorite with cinematographers the world over. A pure analog experience, the meter needle and exposure dial system gives you all reading combinations at a single glance. And because it uses an amorphous photocell that generates its own power, there is no need for a battery.

Incident measurements can be taken with the over 180-degree Lumisphere for general readings of three-dimensional objects, or with the Lumidisc selective area readings, measuring the lighting ratios between highlights and shadow areas or light falling on flat-field objects such as artwork, measurements outdoors or under bright studio lights. The Sekonic L-398A’s swivel head allows you to hold down the metering button and “walk the set” to check light levels. Release the button, and the needle locks down the meter’s analog display needle for easy-to-read exposure calculations. Exposures are displayed for both still and cine applications.

For reflected readings, a flat Lumigrid replaces the Lumisphere. If you plan on shooting with a fixed ISO and shutter speed, an optional Slide Set (Direct Reading Slides) makes it easier to take readings in fast-paced shooting scenarios. The Sekonic L-398A Studio Deluxe III makes an ideal prime or back-up meter for still or motion picture shooters.

L-398A Studio Deluxe III – Technical Specifications

Type: Analog exposure meter for ambient light

Receptor Head: Rotating Domed Head 90° to the right, 180° to the left, Removeable for Contrast Reading

Light Receiving Method: Incident light and reflected light

Receptor Incident Light: Interchangeable Lumisphere and Lumidisc

Receptor Reflected Light: Interchangeable Lumigrid

Light Receptor Element: Amorphous silicon photocell

Measuring Range and Modes

Measuring Modes Ambient Light:

– Aperture priority metering

– EV metering

– Shutter priority metering

Measuring Range (ISO 100) Ambient Light:

– Incident light: EV 4 to EV 17

– Reflected light: EV 9 to EV 17

Repeatability Repeat Accuracy: (+/-) 0.3 EV or less

Calibration Constant Incident: Lumisphere C = 340

Calibration Constant Reflected: K = 12.5

Display Range and Modes

Display Range Film Speed: ISO 6 to 12000 (in 1/3 steps)

Display Range Shutter Speeds Ambient: 60 min to 1/8000 sec. (in 1, 1/2, 1/3 steps)

Display Range Aperture: f/0.7 to f/128.0 (in 1, 1/2, 1/3 steps)

Display Cine Speeds fps: 8 fps -128 fps

Display Range Analog Scale Aperture: f/.7 to f/128 (in 1, 1/2 or 1/3 steps)

Display Range Analog Scale Shutter Speed: 60 sec. to 1/8000 sec. (in 1, 1/2 or 1/3 steps)


Battery Power Indicator Display: Battery Capacity Checker Button and Guide Needle

Battery(Power): Self-powered: Selenium photocell eliminates need for batteries

Dimension and Weight

Product Dimensions: 4.40×2.30×1.30 in./11.20×5.80×3.30 cm

Product Weight: 0.40lbs./0.20kg.

Item Includes

L-398A Case, Strap, Lumidisc, Lumigrid and High Slide

Instant reading of full range of aperture/shutter combinations

The analog dial gives you full range of exposure settings for both still and cine applications at a single glance. The analog needle indicates the brightness in foot-candles.

Amorphous photosensor eliminates need for batteries

The photocell in this meter generates its own energy to move the analog meter needle. The L-398A is always ready to go. There is no need to change batteries.

Swivel Head to position incident dome and maintain full view of display

Easily position the Lumidome for best light reception as you position the meter body for best reading. The swivel head enables “walking the set” to check the evenness of light levels.

Continuous reading plus needle lock for easy and accurate readings

Press and hold the measuring button to take continuous readings in varying conditions. Release the measuring button to lock the analog needle in place for exposure calculation.

Lumidisc for adjusting illumination contrast and measuring illumination intensity

Take selective area readings or measure several lights for ratios between highlights and shadow areas. Also used for measuring light falling on flat-field objects such as green-screens and artwork.

Lumigrid for measuring reflected light

Replace the Lumisphere with the Lumigrid to take reflected light readings of subject areas from the camera position. An optional Slide Set (Direct Reading Slides) enables adjusting the reading meter’s reading range for bright subjects.

Memory pointer retains prior reading

Just align the pointer with the analog needle to transfer brightness readings to the exposure dial. Once set, a second reading can be made to compare brightness of different lights to adjust light ratios.


Supplied with Lumisphere, Lumidisc, Lumigrid, High-slide, case and neck cord. Set of 11 direct reading slides sold separately

If you would like to purchase this, please email Thanks!


For Sale: Gently Used HOLGA 120 GCFN Medium Format Camera 1:8 f=60mm ($50)

Gently used HOLGA 120 GCFN Medium Format Camera 1:8 f=60mm (a Holga 120FN with color flash and glass lens).

Holga 120GCFN is a Glass Lens Medium Format Film Camera with built-in color flash. It produces the well known Holga style classic lo-fi photos with the shadowy vignettes, unpredictable light leaks and soft focus in your square shots. It can accommodate all 120 medium format films. The Holga 120GCFN package is provided with two different film size of frame masks, so that it can take both traditional and square format pictures. The Holga 120GCFN includes a built in flash with a spinning color wheel for your choice of red, yellow, blue or standard white flash. Two batteries are required for operating the built-in flash, but it can still take photo without batteries. Although the Holga 120GCFN is basically a fixed focus camera, it still offers four choices of object distances. Two choice of aperture are available: f/11 & f/8. The multiple exposure can be achieve by not advancing the film after a frame has been exposed. Fifteen camera body colors are available: Black, Blue, Camouflage, Gold, Pink, Purple, Red, Red&White, Silver, YRB, White, Yellow, Tri-Color A/B/C. Have fun with your Holga Film Camera!


Holga 120GCFN Medium Format Film Camera

Shoulder Strap

2 Frame Marks: 6×4.5 & 6×6

Lens Cap

English Instruction Manual


Glass Lens

Color flash wheel lets you choose the color of the flash

Bulb exposure selector for extra long exposures

Standard tripod mount

Revised format arrow

Includes now two frames for the 6×6 and 6×4.5 cm format!

Multiple exposures


Soft focus

Integrated flash can be switched on and off

Leaf shutter

TYPE: 120 Medium Format Film Camera

LENS: 60mm Glass Lens

SHUTTER: Leaf shutter, speed 1/100s

FOCUS: Adjustable, 0.9m to infinity

APERTURE: f/8, f/11

VIEWFINDER: Eye Level Direct

FLASH: Built-in Flash with 4 Colors Filter

DIMENSIONS: 140 x 102 x 76 mm

WEIGHT: 200g

COLOR: White

If you would like to purchase this, please email Thanks!